Spray On Insulation Coating: HPC™ Hot Pipe Coating

Get heat protection that surpasses conventional insulation with HPC™ Coating. HPC™ Coating is a ceramic based, water-borne spray on insulating coating designed to insulate in high temperature situations up to 700°F. Use HPC™ Coating as a base coat/primer or build layers for additional protection.

This video is in Spanish, but you get to see how HPC is used and can be used in combination with our other products.

Uses:

This insulation method is much different than the traditional “wrap” insulation materials that only slow down the loss of heat (known as an R rating or “heat transfer”). The seven ceramic compounds used create a barrier to catch and hold heat on the surface of the unit—be it pipe, furnace surface, boiler, etc. Unlike wraps that use air as the insulation component, the ceramic compounds in HPC™ Coating resist absorbing heat trying to come off the surface to escape. This traps and holds the heat onto the surface for more effective insulation performance.

Benefits of HPC™ Coating:

HPC™ Coating must be sealed with Super Therm® before any solvent-based topcoat can be used. For exterior use, overcoat with Super Therm®. For use in a chemical environment, overcoat with Super Therm® and with either Rust Grip® or Enamo Grip (if color topcoat is desired).

Better Painting is a full service painting contractor for residential, commercial and industrial painting. We are a certified dealer and applicator for Superior Products International, II Inc.'s line of commercial and industrial paint and coatings. We are also certified by SIKKENS and recommend PPG residential and commercial paint and coatings.

Temperature °C

Thermal Conductivity W/(m.K)

-10

0.059

0

0.060

10

0.061

20

0.062

30

0.063

50

0.066

100

0.071

200

0.083

00

0.094

400

0.106

500

0.117

2 Responses

  1. We observed severe heat sink at anchor of liquid sulphur pipeline of Al Hosn Gas, Abu Dhabi. We are looking for insulating anchor support lugs. Even though anchors are designed without having any direct connection with the support base resting on sleeper but there are considerable heat loss. Timtherm is used to separate pipe lug with the support base. To minimise heat loss at anchor point, I feel it is better to paint with insulating quality material. Happy to know your painting system which provides insulation capability.

    1. HPC®/HSC Coatings are formulated to prevent the loss of conductive and convective heat from pipe and vessel surfaces. This capability maintains the overall heat of any fluid or gas within a pipe or vessel and allows the process to operate more efficiently. HPC® Coating will hold heat in a “transmission pipe” for longer distances than traditional insulation systems and will effectively maintain interior temperatures and reduce emissions for a hotter burn. HPC® Coating can be applied to a variety of surfaces with interior temperatures up to 900?F (482?C), such as steam pipes, hot gas pipes, hot storage tanks and oil or gas transmission pipes.

      My email is on my contacts page. When you email me I will send you more detailed information. Also, visit http://www.spicoatings.com. Fill out their contact form and tell them your situation. Please be aware they are closed until 5 Jan for our Christmas holiday.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.